Drip Tubing Can Be Used for Watering Trees

Q. I was thinking of using soaker hoses around my trees instead of drip emitters. Any advice on that?

Drip tubing has emitters embedded in the walls of the tubing.

A. You are calling them “soaker hoses” but I prefer to call them “drip tubing”. Drip tubing is about half inch in diameter with drip emitters embedded in the tubing walls during its manufacture. Its best use is in areas that need water applied evenly to the same depth, repeatedly.

Drip tubing emitters release a precise amount of water at precise distances apart.

            Drip emitters are added to “blank tubing” (no emitters in the sidewalls) after it’s installed. It’s best for watering individual, smaller plants with spaces between plants that should stay dry. Drip emitters are best for watering different kinds of plants of different sizes with varying amounts of water.

Drip tubing must be under a precise pressure, psi, to work properly.

            Drip tubing is ideal for watering trees over 20 feet tall. A coil of drip tubing can be placed under the canopy of a tree and enlarged as the tree gets bigger. The embedded emitters in drip tubing should be 12 to 18 inches apart under the canopy of the tree. The length of tubing needed depends on how much water is applied. When water is applied under medium trees, it should penetrate 18 – 24 inches deep. When water is applied under large trees, it should penetrate 24 – 36 inches deep.